How to fix SSD not recognized, detected or not showing up issue on Windows 10 PC

When you want to improve the performance of your Windows 10 PC, you can employ SSD technology to get the desired efficiency of your device. We can’t ignore the numerous benefits that Solid State Drive (SSD) storage technology has given to modern PCs. When compared to a regular (HDD) Hard Disk Drive, this one provides lightning-fast read-write speeds, low to no noise, and a very low power consumption demand 

However, some users who wish to increase their Windows 10 PC’s performance by switching to SSD are complaining about the SSD device not being recognized or detected. Occasionally, the new SSD will not appear in File Explorer or Disk Management windows, or the “This PC” system settings. If you are getting a similar issue, you have come to the right location since we will be addressing how to fix it in this article. Therefore, if your SSD is not detected, recognized, or shown in your PC settings, keep reading to learn how to troubleshoot the problem.


  • Four solutions are certain to resolve this issue; simply follow the procedures outlined in each of them for a speedier resolution and return of your device to normal operation.

Solution #1: In Windows 10 Settings, assign a Drive Letter to your new SSD.

  • The missing drive letter connected with the new storage device is one of the most prevalent causes of the SSD recognition issue in Windows 10. The new device appears to conflict with an existing storage drive, which causes the issue. To resolve the issue, use Windows 10 Disk Management to manually configure and designate a drive letter to your SSD.
  • Start File Explorer and right-click on This PC.
  • Select Manage.
  • Then, in the Storage section, select Disk Management.
  • Right-click on the SSD partition and choose Change Drive Letter and Paths.”
  • Choose Change from the available options.
  • From the selection menu, select a new drive letter.
  • To confirm your new settings, click OK.
  • Restart your computer and check to see whether the SSD is now recognized.

Solution #2: Setup your new SSD

  • To use your new SSD drive on Windows 10, you must first activate it.
  • Use the Start button search bar to find the Disk Management tool.
  • Right-click it and choose Run as administrator.
  • Right-click your new SSD and choose Initialize Disk.
  • On the Initialize Disk dialogue box, choose the SSD disk to be launched and the partition style.
  • To begin the process, click OK.
  • Return to Disk Management, right-click SSD Volume, and then select New Simple Volume.
  • To allocate the SSD volume and drive letter, follow the on-screen instructions.

Solution #3: Update or Reinstall your Drivers

  • Faulty drivers could be the source of your SSD’s detection problem. You must uninstall and reinstall your SSD to begin a new installation of the device driver.
  • Start File Explorer and right-click on This PC. 
  • Now, under the System Tools section, choose Manage and then Device Manager.
  • The list of storage devices linked to your PC can be found under Disk Drives.
  • Next, right-click on the affected SSD and select Uninstall device.
  • Disconnect the SSD from your computer and restart Windows.
  • Reconnect the SSD and check to see if Windows recognizes it. If it does, it will download and install a new device driver.

Update Storage Controller Drivers:

  • Open the Device Manager window from the Start menu.
  • Locate the Storage controllers and add them to the group.
  • Right-click the storage controller and choose Update driver.
  • Then, select automatically search for updated driver software.
  • Any available updates are installed automatically by Windows.
  • Restart your computer to see if your new SSD is now recognized.

Solution #4: Modify your BIOS to enable SSD settings.

  • If your BIOS does not recognize the SSD, you must configure your SATA controller. It is the hardware interface that connects the motherboard of your computer to the hard disk.
  • The procedures for accessing BIOS and the BIOS menu vary depending on the brand of your Windows PC.
  • Pressing F2 on start-up will take you to the BIOS panel for most manufacturers.
  • Once there, adjust the On-board SATA Mode setting to [AHCI] so that Windows can recognize or detect your SSD disk.

Conclusion:  That’s all! We guarantee you that all of the options listed above have already been demonstrated and tested to assist in resolving the SSD issue on the Windows 10 PC.

Leave a Reply

Your email address will not be published.